Reconstruct a scan as CAD
Build geometry from the scan. Choose the type of geometry you need, then check it before export.
Decide what you need to reconstruct
Name the part of the scan, how you will use the model, and the type of geometry you need. For example: “Reconstruct the visible room walls as editable surfaces for layout work.” Start with one wall, pipe, antenna, or equipment body. Check it before adding more.
| Mode | Meaning | How to ask |
|---|---|---|
| As-built | Preserve the geometry supported by the scan, including real slopes, asymmetry, and misalignment. | “Reconstruct the observed geometry. Do not square up walls or assume repeated objects are identical.” |
| Design intent | Use the supplied design dimensions or intended shape. Show where these differ from the scan. | “Use the supplied nominal dimensions. Show which dimensions differ from the measured condition.” |
For existing-condition work, use as-built reconstruction unless you want a design model. Missing scan data does not show what the missing shape should be.
1. Inspect the scan
- Open the source scene, enable the relevant source layer, and check scale.
- Ask for an inventory of visible components and the areas that cannot be observed.
- Have the agent inspect several views, including opposite sides where data exists. For isolated objects, top, bottom, front, back, left, and right views are a useful check.
- Identify each target separately. Similar-looking antennas or panels may have different orientations and dimensions.
- Choose the first area to reconstruct. Exclude unrelated geometry from the points used for fitting.
Inspect this room before modeling. Identify the visible walls, floors, doors, and windows. List any missing scan areas. Suggest a type of geometry for each feature. Start with the wall facing the current view. Leave other geometry unchanged.
2. Use the simplest suitable geometry
| Observed feature | Useful type of geometry | Review concern |
|---|---|---|
| Flat wall, slab, or panel | A flat analytic surface with a defined boundary. | Use the observed outline. A wall with unknown thickness should not silently become a thick solid. |
| Pipe or round column | An analytic cylinder when the evidence supports it. | Verify axis, radius, and visible extent; distinguish attached objects from the cylinder. |
| Equipment body or antenna | A rotated shape, a fitted mesh with defined faces, or several connected parts. | Do not use a single axis-aligned box when actual tilt or irregular shape matters. |
| Smooth curved surface | A fitted B-spline surface where suitable. | Check local fit and boundaries, not only the average error. |
| Irregular or organic surface | A reconstructed mesh of the selected area. | Mesh density does not establish accuracy or make the result parametric CAD. |
Use analytic surfaces and simple fitted geometry for building or mechanical parts when these match the scan. A mesh can suit an irregular surface. However, its triangles can make axes, edges, and openings harder to review.
3. Reconstruct one part at a time
- Ask the agent to fit the chosen feature to its source evidence.
- Give each object a meaningful name, such as “North wall — observed face” or “Upper antenna 02”.
- Use names and reports to separate observed, inferred, and proposed geometry.
- For openings, preserve actual boundaries. A window within a wall is an internal opening; a doorway reaching the floor changes the outer boundary.
- Do not assume hidden wall thickness, internal parts, or repeated shapes. Use scan evidence or a dimension supplied for the task.
- Inspect the first result with the source visible before asking for the next feature.
4. Compare the geometry with the scan
Show the source and CAD together from several directions. Open Tools → Evaluate fit. Set an Engineering tolerance (m) suitable for the task and scan quality. The default value does not state the scan’s accuracy.
Ask which objects and points the fit check covered. A good fit on the lower mast does not validate the antenna assembly. See fit results and limitations.
Compare each reconstructed wall with its source points. Show source and CAD from opposite directions. Identify areas without supporting points. Report the tolerance and fit results. Keep failed or untested parts marked as not validated.
5. Correct, then export
Name the object that needs a correction in the same conversation. Keep accepted geometry unchanged. Repeat the relevant checks after editing. An earlier fit result applies to the earlier model version.
Export STEP if it supports the geometry you built. Use STL for triangle meshes or CADground JSON for scene data. Selecting STEP does not reconstruct a raw point cloud. Follow the export procedure. Open and check the exported file in the application that will use it.